making my own custom tiles

[Hardlec]

I would very much like to make a very few custom tiles for my terraclips. will matt board work? poster boatd is too thin, even multiple layers.
I have matt board cutting tools, but will have to find a new source of the actual material.

[Mondoz]

Matte board works very well. I have used it to make several custom tiles.

[Sholto]

Terraclips board is 1.7mm thick. Most boards are available in 1.5mm thickness. Handily enough, two layers of paper are 0.1mm each, so you can make double-sided boards of exactly the right thickness.

[Omenbringer]

Sholto would be the man to take advice from for custom tiles (I am still in awe of his custom board and if you haven't seen it then I highly recommend a quick search).

I seem to recall his secret (hinted at above) is printing on full sheets of label paper then transfering those to the matt board for cutting.

[Hardlec]

I have the idea to make some 3*3 and 6*6 tiles, three dimensional, of mushroom forest (big mushrooms) and stalagmites.
I use regular paper sealed with krylon and glued with Aileen 's spray.