show us your board

[schristofersen]

wow! those are awesome.
Are those made out of one set of sewers? or two?
i'm guessing two from glancing through mine last night and now i'm thinking I may have to buy another set.
I really like the multi level board as it reflects the feel of the fluff with the sewers going down several levels.
Game play wise this should make things very challenging for a shooty human crew facing a spirit based or dreamer crew.

[MarsFM]

Some really nice kits here guys, definitely made me interested...

[Croaker]

wow! those are awesome.
Are those made out of one set of sewers? or two?
i'm guessing two from glancing through mine last night and now i'm thinking I may have to buy another set.
I really like the multi level board as it reflects the feel of the fluff with the sewers going down several levels.

The one I built has only one set of sewers used. Though it's practically ever piece in the set!
It does have some stability issues that I'd like to fix - no serious problems - it's been up for over a week on my table and is holding together well, but because of the few walls I had available it's not as sturdy as I'd like.
Also some of the floors are made up of many of the small sections put together so it's not the straightest/flatest level.

[Darios]

Bought myself some Terraclips "streets of Malifaux" yesterday at the LGS...
Great stuff though i might need an additional package of Connectors *g*

[daemonkin]

@Darios: Is that one pack of each? I would like to see what people can do with just one pack. Gives an idea of what's possible.

D.

[Omenbringer]

@Darios: Is that one pack of each? I would like to see what people can do with just one pack. Gives an idea of what's possible.

D.

It is kind of difficult to use only one set for a board as there isn't enough for a whole board in just one set (though the Buildings set could be used to augment a board fairly well). You need at least two of either the Streets and/or Buildings or two Sewers sets to layout a full board (though you will have plenty of extra stuff to fill out the board with elevations and walls and such).

[Pierowmaniac]

An image taken from my blog post
http://wills-tabletop-gaming-blog.blogspot.com/

This 3'x3' board is made from 1 set of sewers and 1 set of streets

[poulpox]

Ok, here's a (almost) full Malifaux board, 2'x3'. I actually realised that there's not much point spending time to build in the 6" of the standard deployment zone as models are out of there in no time, so instead I built the middle band (since I'll place the TCP on a green grass board I'll just add some trees in each deployment zones and bob's your uncle!).

I used the 3 sets (one of each set, although very little of the sewer set, mainly to save the walls and tiles from other sets) and had still some spare bits (I think I could have done one more small house if needed); I could have probably saved more tiles if not putting the raised 1st level on tiles (ie by having the walls only to support the first floor... you know what I mean! )
In terms of clips I was left with 7 L clips and didn't have to force myself to save them other than the scattering recommended, so another great result!

I feel happy that I managed to do a full board! It's not overly complicated and although took me 2 days to make, would probably take about 30min if following the pics I took.
I hope it helps others for lay-out ideas!

Oh and lastely I want to point out that although the clips seem very obvious when looking at the pictures I think it's primarily due to the flash as when you look at the table with naked eye they don't pop out like this.
Great great product!!
















Final shot, sniper in position... :P

[steelwraith]

heres mine , 1st go at building one , use streets and buildings , 2 boxes of clips.
i reckon they got the ratios wrong (1 box o clips per building box ect), i reckon you need 11/2 boxes of clips , just so you can use all your bits and make sure everything is sturdy.
on the street side of things , im gonna get some polystyrene blocks , 3x3x2 inch, 6x6x2 inch and 3x6x2 inch to use to fill dead spaces, will make making raised areas alot easier, to support one raised area i had to turn some walls upside down and clip them in to act as support struts.

other than that , i think these terraclips are bloomin marvelous , wonder if they will ever do a sci-fi one???

[Darios]

@Darios: Is that one pack of each? I would like to see what people can do with just one pack. Gives an idea of what's possible.

D.

jup. one of each. In theory it would be possible to do a 3"3 Board just with one... but then it would be mostly flat with just one level...

This one is about 2"x2" (a little bit more in fact)